PIX failover I.

Unanswered Question
Jul 10th, 2007
User Badges:

Hi all,


Id like to consult my first problem related

to failover configured on PIXs 525 with ver. 7.0.4. I constantly see this message

on secondary PIX :

%PIX-3-210005: LU allocate connection failed


But when I look at free mem (CLI command

show mem) I see that free mem. is 74 % on both PIXs.


So any idea?


BR

jl

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Hello.


Maybe there is suspect RAM?


It would be interesting to see if this occurs when the unit is secondary - active.


Are the units identical?


Taken from log message information


Error Message %PIX-3-210005: LU allocate connection failed

Explanation Stateful Failover cannot allocate a new connection on the standby unit. This may be caused by little or no RAM memory available within the firewall.


Recommended Action Check the available memory using the show memory command to make sure the PIX Firewall has free memory in the system. If there is no available memory, add more physical memory to the firewall.




johnleeee Wed, 07/11/2007 - 00:13
User Badges:

Hello,


thanks for your explanation. Yes, both PIXs are

identical. It is from definition of failover...

both PIXs has to be identical in SW and HW.

I read Error Message from Cisco you just wrote above but on both PIXs is 73% free memmory..


So why we see this message on secondary PIX....still ?



Any idea..?


BR

jl

Actions

This Discussion