07-10-2007 02:20 PM - edited 02-21-2020 01:36 AM
I want to add an internet routable address that points to my inside interface but the ASA is automaticaly converting the first octect to a non routable address is there a way to prevent this?
07-10-2007 07:39 PM
Sounds interesting.
Sounds silly but are you making sure the command is
route inside x.x.x.x 255.255.255.0 ip.of.inside.gateway
Where "inside" is the name of your internal interface?
07-11-2007 08:09 AM
Yes I checked to make sure all the parameters are entered correctly. The first octet is 208.x.x.x when I hit return the do not get an error or warning but when I do a show run route it has changed the 208.x.x.x to 192.x.x.x.
07-11-2007 08:43 AM
What version of code are you running on the ASA?
Can you send me the exact IP address you are trying to enter, please. I tried in the lab, it doesn't change.
Thanks
Gilbert
07-11-2007 08:57 AM
I am running 7.2 this is what I am entering ?route inside 208.177.125.146 225.255.255.255 10.64.2.1? and this is what it show in the running config ?route inside 192.177.125.146 225.255.255.255 10.64.2.1?
07-11-2007 09:07 AM
Ok - there is another digit after 7.2.
Can you send me the sh version from the ASA please.
Thanks
gilbert
07-11-2007 09:09 AM
I tried it here, it works well.
Would it be possible that you can please send me the config of the ASA as well.
Thanks
gilbert
07-11-2007 09:20 AM
Cisco Adaptive Security Appliance Software Version 7.2(2)
Device Manager Version 5.2(2)
sorry can not send config.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: