enable webinterface on a Cisco Aironet 1240AG

sdhondt32 · ‎07-11-2007

We installed some time ago a wireless bridge between 2 buildings and disabled the webinterface. does someone know how i can re-enable it from within an SSL connection?

Thx

ebreniz · ‎07-18-2007

To re-enable the web-browser interface, enter this global configuration command on the access point CLI: ap(config)# ip http server

carlos.ing.navarro · ‎03-23-2017

can i do it whit the command

AP#debug lwapp console cli or debug capwap console cli=?

example

debug capwap console cli

conf t

ip http server

my AP model = 1142n whit disabled web access

other question what is the command to save all changes

thanks for ur attention

PiotrDezor16899 · ‎10-24-2019

ap>en
Password:
ap#conf t
Enter configuration commands, one per line. End with CNTL/Z.
ap(config)#ip http server
ap(config)#exit
ap#

JLVB83 · ‎08-18-2020

Hey guys new to the community I'm trying to do something similar picked up a old AP from a recycle bin AIR-CAP3502I-A-K9 I was able to default it, set a static IP, enable the HTTP server, but when i log into the GUI I see an enter button and when I click on it, the unit tells me its not in flex connect mode. I would like to access the GUI if it truly has one just because the CLI interface is still a little daunting for me. Any help would be great thks.