1410 Bridges Associated but not passing traffic

Answered Question
Jul 11th, 2007
User Badges:

I have 4 1410 bridges in a point to multipoint configuration. I have 1 root ridge and 3 non-root bridges. The 3 non-root bridges are associated with the root bridge; however I cannot ping or pass any traffic over the wireless interfaces. Any suggestions on what might be the problem.

Correct Answer by srosenthal about 9 years 10 months ago

Can you post the configs?


Are you able to connect to each bridge from the root site? Do you have VLAN's defined and are all the bridges configured for the same native vlan?


Seth Rosenthal, CWNE #55

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
srosenthal Thu, 07/12/2007 - 07:15
User Badges:

Can you post the configs?


Are you able to connect to each bridge from the root site? Do you have VLAN's defined and are all the bridges configured for the same native vlan?


Seth Rosenthal, CWNE #55

moorejb Thu, 07/12/2007 - 10:13
User Badges:

Never mind got it working, wrong encryption settings.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode