WLAN AP 1130ag

Answered Question
Jul 12th, 2007
User Badges:

Hi All,


I have installed a 1130ag for the first time and I can not bring up the wireless/radio interface?

I have it connected via http at the moment, and have tried to enable the radio through the GUI but it does not come up? (It normally comes up this way with with 1200's)

Can anyone suggest anything?


Many thanks,


Nathan.

UK.

Correct Answer by bwalchez about 10 years 1 week ago

A WLAN on H-REAP is said to operate in local switching mode if the data traffic of that WLAN terminates locally at the wired interface of the LAP itself, without getting tunneled to the WLC. Cisco Aironet 1400 Series Wireless Bridges do not support WPA 2 or AES.


For more information please click following URL:


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#ent



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
bwalchez Wed, 07/18/2007 - 09:58
User Badges:

A WLAN on H-REAP is said to operate in local switching mode if the data traffic of that WLAN terminates locally at the wired interface of the LAP itself, without getting tunneled to the WLC. Cisco Aironet 1400 Series Wireless Bridges do not support WPA 2 or AES.


For more information please click following URL:


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#ent



Actions

This Discussion