Solved: WLAN AP 1130ag

jahnathan1 · ‎07-12-2007

Hi All,

I have installed a 1130ag for the first time and I can not bring up the wireless/radio interface?

I have it connected via http at the moment, and have tried to enable the radio through the GUI but it does not come up? (It normally comes up this way with with 1200's)

Can anyone suggest anything?

Many thanks,

Nathan.

UK.

bwalchez · ‎07-18-2007

A WLAN on H-REAP is said to operate in local switching mode if the data traffic of that WLAN terminates locally at the wired interface of the LAP itself, without getting tunneled to the WLC. Cisco Aironet 1400 Series Wireless Bridges do not support WPA 2 or AES.

For more information please click following URL:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#ent

View solution in original post

bwalchez · ‎07-18-2007

A WLAN on H-REAP is said to operate in local switching mode if the data traffic of that WLAN terminates locally at the wired interface of the LAP itself, without getting tunneled to the WLC. Cisco Aironet 1400 Series Wireless Bridges do not support WPA 2 or AES.

For more information please click following URL:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#ent