Calling Line Restricted Problem

Unanswered Question
Jul 12th, 2007

Hi to all,

in the following scenario ccme interconnected to Panasonic KX-TD-816-232 PBX through ISDN BRI, can't see calling line ID on incoming(for ccme) calls.

In voip ccapi debug i see Presentation=Restricted on the incoming dial-peer 10. Tried to override this field with no success. Please help with this. Will atach debug and running config.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Paolo Bevilacqua Thu, 07/12/2007 - 12:36

Indeed the PBX is placing the call with presentation restricted:

Calling Party Number i = 0x01A1, '114' <-- BIT 5 is set !

Hence IOS is dutifully restricting CLID.

Please check PBX configuration to allow CLID presentation.

Hope this helps, please rate post if it does!

Actions

This Discussion