Accessing a remote VPN client from the protected network.

Unanswered Question
Jul 12th, 2007
User Badges:

I have a remote client that is able to create a good VPN tunnel to our PIX-515 from his PC using the Cisco VPN client software. When the tunnel is established he is able to access our internal services. I would like to VNC to his desktop from my workstation on the protected network. His PC has the Windows firewall turned off, but I am still unable to connect to port 5900. Is there something in the access-list that needs to be opened to allow this to happen?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
acomiskey Thu, 07/12/2007 - 08:55
User Badges:
  • Green, 3000 points or more

Check that the vpn client firewall is disabled. Options -> Stateful Firewall

Please rate helpful posts.


This Discussion