07-12-2007 10:26 AM - edited 03-05-2019 05:16 PM
I have a catalyst 4506 with a Sup II+, two 24-port 10/100/1000 modules (WS-X4524-GB-RJ45V) and two 1300 watt power supplies. I am not going to be using the POE support on the modules.
I need to upgrade the 4506 chassis to a 4507R so I can add a redundant Sup II+ engine.
Will the 1300w power supply be sufficient to support the new chassis and dual sups?
Solved! Go to Solution.
07-13-2007 03:50 AM
You should be OK.
You should be able to use the command "sh power detail" on the current switch to see what the cards are pulling right now and then base your power budget on that information.
07-13-2007 03:50 AM
You should be OK.
You should be able to use the command "sh power detail" on the current switch to see what the cards are pulling right now and then base your power budget on that information.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide