07-12-2007 01:42 PM - edited 03-11-2019 03:44 AM
We loads of users that connect to an external VPN we have give each user an external IP to NAT to their internal IP for the PPTP to work and the Gre protocol, can we just use one external IP? They rarely log on at the same time.
07-12-2007 03:45 PM
Yes, on 6.3X there is the following command:
fixup protocol pptp
On 7.0, You have to use the inspect pptp command.
This link should cover both.
07-12-2007 11:40 PM
I can only use the ADSM, how can I do that in there?
07-13-2007 02:49 AM
ASDM --> Configure --> Security Policy --> Service Policy Rules --> Double Click on your Policy --> Select Rule Actions --> Under Protocol Inspection Select "PPTP" --> Click "OK" --> Click "Apply" --> Click "Save"
07-13-2007 03:24 AM
I only have a default rule in there, what will this achieve?
Doing just this would mean PPTP would just work? And I can remove all the NAT's to users?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide