Assigning IP address to ACS 4.0

Unanswered Question
Jul 12th, 2007

Dear Experts ,

Cisco ACS 4.0 for windows has two interfaces to assign IP address...

I would like to know how to aasign Ip address to two interfaces individually..

Cheers :)

Satish

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dsweeny Wed, 07/18/2007 - 13:57

Ease of use is the overriding design principle of the web interface in Cisco Secure Access Control Server Release 4.0 for Windows, henceforth referred to as ACS. ACS presents intricate concepts of network security from the perspective of an administrator. You can use the Interface Configuration section of ACS to configure the ACS web interface?you can tailor the interface to simplify the screens that you will use by hiding the features that you do not use and adding fields for your specific configuration.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a008052e954.html

Jagdeep Gambhir Thu, 07/19/2007 - 05:34

It seems that you are asking about acs appliance which has two interfaces.

ACS SE supports the operation of only one Ethernet connector at a time. Concurrent operation of both Ethernet connectors is not supported.

Regards,

~JG

Actions

This Discussion