Question about configuring Custom Queueing

Unanswered Question
Jul 13th, 2007

Hi Sir,


I'm configuring a Custom Queueing (CQ) to assign telnet/SSH traffic to queue 3. Is the following config valid?


!

queue-list 1 protocol ip 3 tcp telnet

queue-list 1 protocol ip 3 tcp 22

!


Or, should it reference an ACL, as follows?


!

access-list 100 permit tcp any any eq telnet

access-list 100 permit tcp any any eq 22

!

queue-list 1 protocol ip 3 list 100

!



Please advise.



Thank you.


B.Rgds,

Lim TS


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
limtohsoon Fri, 07/13/2007 - 02:12

Hi,


I just found out that if we configure "queue-list 1 protocol ip 3 tcp telnet", this will match IP packets originated or destined to TCP port 23.



Thank you.


B.Rgds,

Lim TS


Actions

This Discussion