07-13-2007 02:50 AM - edited 03-14-2019 10:32 PM
has anybody got a config for a vg224 that works with fax ? i'm being told the best config is to use H323. Also if the outside lines are on a MGCP gateway does this require additional configuration.
07-13-2007 03:22 AM
Hi
I use mgcp to manage mine and it works fine. here is the important part of the config
ccm-manager mgcp
ccm-manager config server X.X.X.X (where x.x.x. is callmanager publisher server ip)
ccm-manager config
!
mgcp
mgcp call-agent x.x.x.x 2427 service-type mgcp version 0.1(where x.x.x. is callmanager subscriber server ip)
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp modem passthrough voip codec g711alaw
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
mgcp profile default
colin
07-13-2007 03:39 AM
Colin
Could you possibly provide the full config for me to look through. I notice you are not using t38, does this mean you are using inband G711 codec.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: