Port re-direction on ASA 5505

Unanswered Question
Jul 13th, 2007
User Badges:

I have set up port redirection on the ASA 5505 in the following way


static (inside,outside) tcp [global_ip] 80 [inside_ip] 80 netmask 255.255.255.255


static (inside,outside) tcp [global_ip] 25 [inside_ip] 25 netmask 255.255.255.255


static (inside,outside) tcp [global_ip] 443 [inside_ip] 443 netmask 255.255.255.255


and I have set up the appropriate ACL. But I see no traffic and this doesnt work.. it works fine if I use NAT rather than PAT.. also works fine on a ASA 5510

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
acomiskey Fri, 07/13/2007 - 05:47
User Badges:
  • Green, 3000 points or more

Usually this is an issue when [inside_ip] = outside interface ip. If that is the case you must change [inside_ip] to the keyword "interface".


static (inside,outside) tcp interface 80 [inside_ip] 80 netmask 255.255.255.255


Is this the case?


Actions

This Discussion