show ip EIGRP topology

Unanswered Question
Jul 13th, 2007

Hi people,

I want to know how to interpret properly this command?

What am I supposed to determine from this command?

Regional1 Con0 is now available

Press RETURN to get started!

Regional1>enable

Regional1#show ip eigrp topology

IP-EIGRP Topology Table for AS(222)/ID(192.168.80.33)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,

r - reply Status, s - sia Status

P 192.168.95.0/24, 1 successors, FD is 2172416

via 192.168.77.34 (2172416/28160), FastEthernet0/0

P 192.168.80.0/24, 1 successors, FD is 2172416

via Connected, Serial0/1

P 192.0.18.0/24, 1 successors, FD is 2172416

via Connected, FastEthernet0/1

P 192.168.77.0/24, 1 successors, FD is 2172416

via Connected, FastEthernet0/0

P 192.168.90.0/24, 1 successors, FD is 2172416

via 192.168.80.34 (2172416/28160), Serial0/1

P 192.168.70.0/24, 1 successors, FD is 2172416

via 192.168.36.14 (2172416/28160), Serial0/0

P 192.168.36.0/24, 1 successors, FD is 2172416

via Connected, Serial0/0

Regional1#

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion