I constantly receive trap information on 3750 switch for interface up/down and would like to disable this notification. Is there some way to disable the notifications for workstation interfaces and keep trunk interfaces active? Thank you for any assistance
Configure 'no snmp trap link-status' on ports for which you don't want to receive link status alarms.
SW1-3550(config-if)#no snmp trap ?
link-status Allow SNMP LINKUP and LINKDOWN traps
mac-notification MAC Address notification for the interface
SW1-3550(config-if)#no snmp trap link-status
SW1-3550(config-if)#do show run int f0/1
Current configuration : 171 bytes
switchport mode access
no snmp trap link-status