07-13-2007 10:08 AM
i am trying to configure a catos switch and need to apply the followng ios commands. is there an equivalent catos command for the following ios commands listed below?
tnx
snmp-server location
snmp-server contact
snmp-server chassis-id
Solved! Go to Solution.
07-13-2007 10:14 AM
set system location
set system contact
There is no chassis-id equivalent since CatOS does not support the OLD-CISCO-CHASSIS-MIB.
07-13-2007 10:15 AM
07-13-2007 10:19 AM
Hi.
set system location
set system contact
set snmp chassis-alias
HTH,
-Joe R.
07-13-2007 10:14 AM
set system location
set system contact
There is no chassis-id equivalent since CatOS does not support the OLD-CISCO-CHASSIS-MIB.
07-13-2007 10:15 AM
set system location
set system contact
set snmp chassis-alias
07-13-2007 10:19 AM
Hi.
set system location
set system contact
set snmp chassis-alias
HTH,
-Joe R.
07-13-2007 10:32 AM
set snmp chassis-alias is not a true equivalent. chassis-id was used by management applications (like RME) to get a serial number for the device which was otherwise not obtainable. set snmp chassis-alias sets the entPhysicalAlias for the chassis. While this would allow you "name" your chassis, it will not necessarily be used in the same way that chassis-id was.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: