07-13-2007 10:24 AM
I've got to 6509s with Sup720s running 12.2(18)SXF8 at two different sites and want to link them via 100MB metro ethernet. I can't seem to get a link on the GLC-T; will the line card not support anything below 1GB?
Solved! Go to Solution.
07-15-2007 05:56 AM
Friend,
The GLC-T module is a 1000baseT module but can be used to connect a ME link of 100 Mbps
when you confiure the link, make sure the bandwidth statement reflects the correct bandwidth under the interface and all QoS and routing protocol decisions are taken acoording to that.
I have terminated a ME link of 45Mbps on a gig port and is working fine.
HTH, rate if it does
Narayan
07-13-2007 10:59 AM
Nope, 1000MB only.
HTH and please rate.
07-15-2007 05:56 AM
Friend,
The GLC-T module is a 1000baseT module but can be used to connect a ME link of 100 Mbps
when you confiure the link, make sure the bandwidth statement reflects the correct bandwidth under the interface and all QoS and routing protocol decisions are taken acoording to that.
I have terminated a ME link of 45Mbps on a gig port and is working fine.
HTH, rate if it does
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide