Jon Marshall Sat, 07/14/2007 - 00:41
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


You don't say which IOS version you are using but yes it is perfectly possible to configure vlans on the 7613.


Attached is a link to configuration guide for 12.2sx on the 7600. You need to look at the following chapters


Configuring vlans

Configuring layer 3 interfaces


http://www.cisco.com/en/US/products/hw/routers/ps368/products_configuration_guide_book09186a00801d4269.html


HTH


Jon


vinay_verma80 Sat, 07/14/2007 - 05:10
User Badges:

hi

in any switch u should be able to create vlan


if it is ios version then u can use the command



if the interface is ip interface use command

#switchport( interface config mode)


after that is normal config

ie go to config mode


vlan 100- to create vlan


regards


Actions

This Discussion