07-14-2007 11:31 AM - edited 03-14-2019 10:33 PM
Hi, All,
This might be silly but anybody can advise me if I can use PRI to carry voice and data simultaneously? i.e. Allocate some channels for my VoIP traffic and remaining one for my normal IP traffic? Any reference material? Thanks.
07-14-2007 11:37 AM
Sure it's possible,what router models do you have? The AS5x00 are very good for that, but also the ISR routers can. Depending on the model there are different configurations.
Hope this helps, please rate post if it does!
07-15-2007 06:35 PM
Thanks for the suggestion. May you illustrate a bit more on this or suggest me some document/readings? Thanks. Currently we are using a Cisco 2851 with VWIC and PVDM.
07-15-2007 11:57 PM
Hi,
This is your guide to integrate voice and data calls with the ISR router. The feature requires IOS 12.4(9)T, or newer.
http://cisco.com/en/US/products/ps6706/products_feature_guide09186a00805fe293.html
Hope this helps, please rate post if it does!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: