danrog Mon, 07/16/2007 - 16:07
User Badges:

Have you found an answer to this? I need to add static routes as well.

danrog Mon, 07/16/2007 - 17:29
User Badges:

I opened a TAC case and just found out the answer, its not a good one.


Going from the problem details, you require static routes to be created on CCM5.x.Unfortunately, this is currently not supported with CCM5.x.


A bug has been filed for this new enhancement:


CSCse56091

Externally found enhancement defect: Assigned (A) CM 5.0 - not able to add static routes


Symptom:

Right now, callmanager 5.0 is not capable of adding static routes when default gateway that is not able to handle routing protocols is present.


Conditions:

Callmanager 5.x


Workaround:

Set the default gateway to a device that can handle routing protocols


I have attached this SR to the bug. The schedule fix is for CCM6.1, however you can check the status of this bug by going to:


http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl


amanolahi Mon, 07/16/2007 - 23:03
User Badges:

Thank you for the information. As a Work around we are sending the packets to a device, which can deal with the packets.


I wounder way it is not possable to set an static route in CM. In most cases an for security resaon one may to delete the default-gateway and set one ore more static route to a specific destination.


Naser

nextiraone.de




Actions

This Discussion