static route in CM 5.xy

Namsys · ‎07-14-2007

ist it possible to put a static route in to CM 5.yx (call Manager) Server?

Any help would be appreciated!

danrog · ‎07-16-2007

Have you found an answer to this? I need to add static routes as well.

Namsys · ‎07-16-2007

no, unfortunatly I did not.

danrog · ‎07-16-2007

I opened a TAC case and just found out the answer, its not a good one.

Going from the problem details, you require static routes to be created on CCM5.x.Unfortunately, this is currently not supported with CCM5.x.

A bug has been filed for this new enhancement:

CSCse56091

Externally found enhancement defect: Assigned (A) CM 5.0 - not able to add static routes

Symptom:

Right now, callmanager 5.0 is not capable of adding static routes when default gateway that is not able to handle routing protocols is present.

Conditions:

Callmanager 5.x

Workaround:

Set the default gateway to a device that can handle routing protocols

I have attached this SR to the bug. The schedule fix is for CCM6.1, however you can check the status of this bug by going to:

http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl

Namsys · ‎07-16-2007

Thank you for the information. As a Work around we are sending the packets to a device, which can deal with the packets.

I wounder way it is not possable to set an static route in CM. In most cases an for security resaon one may to delete the default-gateway and set one ore more static route to a specific destination.

Naser

nextiraone.de