07-16-2007 05:36 AM - edited 03-05-2019 05:18 PM
Someone enabled port security on a 3750 switch that we need to disable. Is there a global configuration command that I can use instead of trying to disable it manually on 48 ports? any other recommendations will be appreciated.. Thanks,
Solved! Go to Solution.
07-16-2007 05:41 AM
Hi
Could you not just do
switch(conf t)# int range fa0/1 - 48
if gig ports gi0/1 - 48
switch(config-if-range)# no switchport port-security
HTH
Jon
07-16-2007 05:41 AM
Hi
Could you not just do
switch(conf t)# int range fa0/1 - 48
if gig ports gi0/1 - 48
switch(config-if-range)# no switchport port-security
HTH
Jon
07-16-2007 05:54 AM
Agree with Jon, just use " interface range" command and disable the port-security on all the interface :
conf t
interface range gig 1/0/1 - 48
no switchport port-security
HTH,
-amit singh
07-16-2007 09:47 AM
Awesome.. Thanks guys. 1 last thing to confirm. We have STP port fast enabled on that switch.. does removing port security cause problems with this or should I also disable Port Fast. Thanks for your help on this 3750.
07-16-2007 09:54 AM
Disabling port security shouldn't affect portfast or other configuration of the port.
HTH
Sundar
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: