07-16-2007 05:36 AM - edited 03-05-2019 05:18 PM
Someone enabled port security on a 3750 switch that we need to disable. Is there a global configuration command that I can use instead of trying to disable it manually on 48 ports? any other recommendations will be appreciated.. Thanks,
Solved! Go to Solution.
07-16-2007 05:41 AM
Hi
Could you not just do
switch(conf t)# int range fa0/1 - 48
if gig ports gi0/1 - 48
switch(config-if-range)# no switchport port-security
HTH
Jon
07-16-2007 05:41 AM
Hi
Could you not just do
switch(conf t)# int range fa0/1 - 48
if gig ports gi0/1 - 48
switch(config-if-range)# no switchport port-security
HTH
Jon
07-16-2007 05:54 AM
Agree with Jon, just use " interface range" command and disable the port-security on all the interface :
conf t
interface range gig 1/0/1 - 48
no switchport port-security
HTH,
-amit singh
07-16-2007 09:47 AM
Awesome.. Thanks guys. 1 last thing to confirm. We have STP port fast enabled on that switch.. does removing port security cause problems with this or should I also disable Port Fast. Thanks for your help on this 3750.
07-16-2007 09:54 AM
Disabling port security shouldn't affect portfast or other configuration of the port.
HTH
Sundar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide