07-16-2007 09:36 PM - edited 03-05-2019 05:19 PM
We have a 3750 that is stacked. Stack 2 and 3 is running on RPS but stack 1 is fine. Is there a way we can reload just stack 2 and 3?
Thanks
nj40ki01xds02#show env stack
SWITCH: 1
FAN is OK
TEMPERATURE is OK
POWER is OK
RPS is AVAILABLE
SWITCH: 2
FAN is OK
TEMPERATURE is OK
POWER is FAULTY
RPS is SUPPLYING
SWITCH: 3
FAN is OK
TEMPERATURE is OK
POWER is FAULTY
RPS is SUPPLYING
07-17-2007 12:39 AM
Hi
Use the reload command, but put the stack member number after it:
reload slot 2
reload slot 3
Aaron
Please rate helpful posts...
07-17-2007 02:45 AM
Alternatively, you can logon to the certain switch in a stack using "session X" command, where X is a switch number in a stack. You can see which is which using "show switch command"
#sh switch
Current
Switch# Role Mac Address Priority State
--------------------------------------------------------
*1 Master 000f.f762.a400 8 Ready
2 Slave 0012.01f9.af80 1 Ready
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide