07-17-2007 03:26 PM
Hello,
Please, how can I configure CiscoWorks LMS 2.6 for auto-discovery?. What is the module that I need to configure?
Tks.
07-17-2007 03:44 PM
Hi.
You can configure discovery of your network devices through Campus Manager.
This is when the online help will be very helpful to you. So, I think the best way for you to proceed is to go to Campus Manager -->Administration and then click "help" in the upper-right corner of the screen. That will bring up the online help and should have everything you need there to set-up discovery.
If you have any questions after this, please post them here and I'll be happy to assist.
Regards,
-Joe R.
07-18-2007 07:22 AM
Thank you Joe, I'll search this option and I'll apply it.
07-17-2007 06:17 PM
If you don't have any devices in the DCR already, you'll want to add some seed devices in Campus Manager.
The following white paper is for LMS 2.5, but has all you need for 2.6:
http://www.cisco.com/application/pdf/en/us/guest/products/ps2425/c1244/cdccont_0900aecd8026ee8d.pdf
Scroll to the section Defining a Seed device in Campus Manager. It also has info on all configurations needed on the devices.
07-18-2007 07:23 AM
Thank you davistan, I'll search this information and I'll apply it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide