07-17-2007 03:33 PM
I have upgraded a new 6509 CatOS to Cisco IOS but not an existing production CatOS.
Would I be correct that the existing configuration is lost in the upgrade? Does cisco have a utility to convert CatOS configuration to Cisco IOS? Or should I concede and plan for a manual reconfiguration.
Thanks,
Dan
Solved! Go to Solution.
07-17-2007 07:36 PM
Hi Dan
Hope this helps..
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml
regds
07-17-2007 07:36 PM
Hi Dan
Hope this helps..
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml
regds
07-18-2007 07:35 AM
this is what I was looking for ... thank you
07-17-2007 07:40 PM
Hi Dan
Hope this helps..
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080816fbc.shtml
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide