WLC4402 with WLAN Guest Webpolicy cert and redirect issue

Unanswered Question
Jul 18th, 2007

Hi I have a WLC4402 with WLAN SSID Guest open authentication set to Webpolicy

Attached is the config, I have a lobbyadmin username that create users, my guest users are able to get IP but when they fireup their IE or Mozilla browsers, the cant get any ssl certs or redirected to the login splash page.

However when I reboot the wLC4402, the users are able to get the cert and redirected to splash page... The situation happens after 1 day and I need to reboot again...anyone can help me out? rebooting is not an option for me

regards

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Set up the DHCP scope and excluded addresses.

Note: Excluded addresses are optional.

Refer to Cisco IOS DHCP Server for a more detailed explanation of the DHCP server in Cisco IOS Software.

Turn on integrated routing and bridging, and set up the bridge group.Assign an IP address to interface Bridge-Group Virtual Interface 1 (BVI1).

Set up wireless.

Assign interface Dot11Radio0 or Dot11Radio1 to bridge group 1.

Assign a service set identifier (SSID) to the radio interface, and then define open authentication

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode