WCCP Configuration on WS-C3560G

Unanswered Question
Jul 18th, 2007

Hi Team,

I would like to get some info on configuration of WCCP on WS-C3560 Switch. I have enabled WCCP and I see that the WCCP has also identified its peer, but I am unable to do a transparent proxy configuration to a Trend Micro Box which is running WCCP.

I am running the latest IOS on WS-C3560 12.2.37 SE1 and it doest support the IP WCCP x redirect out command.

Regards,

Sriharshaa Prabhakar

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
andrew.burns Fri, 07/20/2007 - 07:40

Hi,

The "redirect out" command isn't supported on the 3560 as you've discovered - the following link covers the limitations:

http://www.cisco.com/en/US/products/hw/switches/ps5528/products_configuration_guide_chapter09186a008081db5b.html

I think the Trend only supports GRE (not L2-rewrite) but I'm fairly sure the only method currently available on the 3560 is L2-rewrite so you may be out of luck with this.

HTH

Andrew.

Sriharshaa Prabhakar Fri, 07/20/2007 - 12:06

Hi Andrew,

You are correct, the Trend Micro supports GRE, Thanks for your post, I believe I would not be able to achieve the redirection using the WS-C3560G Box...

Actions

This Discussion