Cisco 4-Port Async/Sync Serial High-Speed WIC

Unanswered Question

As per the document of the above hardware, a speed of 230kbps can be achieved using PSTN lines. However it is not mentioned what end to end infrastructure we need to achieve 230kbps using PSTN lines.

what i understand that I need cisco 1800/2800/3800 series router and cisco Async/Sync High speed WICs at both end and PSTN line.

Could some have idea/implemented such a solution using above hardware/infrastrcuture to achive 230kbps using PSTN lines.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mohammedmahmoud Thu, 07/19/2007 - 01:19
User Badges:
  • Green, 3000 points or more

Hi,


Many modern devices can exceed the low known speeds of asynchronous communication (38,400 and 57,600 bit/s being common, and 115,200 and 230,400 bit/s making occasional appearances) while still using RS-232 compatible signal levels.


http://www.quatech.com/support/comm-over-asyncserial.php

http://en.wikipedia.org/wiki/RS-232


HTH,

Mohammed Mahmoud.

Actions

This Discussion