07-19-2007 05:55 AM - edited 03-14-2019 10:39 PM
Callmanager 4.1.3sr4d. Customer hit meetme, dialed the number and then parked. From then on this meetme number is not usable. Busy tone. Tried starting and stopping services, resetting conference bridge, deleting the particular number. nada I did a cm trace and CM thinks the number is in use.
07-19-2007 06:20 AM
Remember that the correct procedure is the following:
For the person initiating the conference:
1.- Press the MeetMe softkey
2.- Dial the MeetMe extension
3.- Press the MeetMe softkey again
For the person joining the conference:
1.- Dial the MeetMe extension
If you are following the above procedure please upload the CCM detailed trace and also information about the call. Which extension initiated the conference, which extension attempt to join, etc.
07-26-2007 03:39 AM
Thanks, I solved the problem by restarting CM service on subscriber.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide