cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
215
Views
0
Helpful
1
Replies

svc-cmm6T1 and CCM

fredj1234
Level 1
Level 1

I'm working on upgrading c6500 sw from cat to native.

On call manager 4.2(3), when I add CMM module as a gateway. I only see the ws-6600 and <none>, am I unable to see the act and cmm6T1 on the ccm.

Is there an additional installation or addon/patch to ccm I need to set up for it to read the card correctly? Or am I able to just work around this by doing it all through CLI on the switch. Any recommendations or advice?

-Thanks in advance

Fred

1 Accepted Solution

Accepted Solutions

gogasca
Level 10
Level 10

Try:

ciscocm.4-2-3-sr2b.exe

In my lab works just fine.

View solution in original post

1 Reply 1

gogasca
Level 10
Level 10

Try:

ciscocm.4-2-3-sr2b.exe

In my lab works just fine.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: