Show temperature - IOS 12.3, 3745 router

Answered Question
Jul 19th, 2007
User Badges:

Hi, without SNMP monitoring, can I occasionally check temperature of a router?


The scenario is that I will be deploying few routers and switches in a non-refrigerated computer room and I just would like to see whether I could check the temperature once in a while.

Correct Answer by guruprasadr about 9 years 11 months ago

HI, [ Pls Rate if HELPS ]


As a continuation of Mohammed Reply:


Execute as below in 3745: for IOS Version 12.3:


Router#show environment


--Output of Show Environment Command--


Power Supply 1 is present.

Fan status: normal

Input Voltage status: normal

DC Output Voltage status: normal


Power Supply 2 is present.

Fan status: normal

Input Voltage status: normal

DC Output Voltage status: normal


48V Power Supply 3 is not present.


48V Power Supply 4 is not present.


Board Temperature: normal.



PLS RATE if HELPS



Best Regards,


Guru Prasad R

Correct Answer by mohammedmahmoud about 9 years 11 months ago

Hi,


Kindly use the "show environment" command.


HTH,

Mohammed Mahmoud.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (4 ratings)
Loading.
Correct Answer
mohammedmahmoud Thu, 07/19/2007 - 10:55
User Badges:
  • Green, 3000 points or more

Hi,


Kindly use the "show environment" command.


HTH,

Mohammed Mahmoud.

Correct Answer
guruprasadr Thu, 07/19/2007 - 23:39
User Badges:
  • Gold, 750 points or more

HI, [ Pls Rate if HELPS ]


As a continuation of Mohammed Reply:


Execute as below in 3745: for IOS Version 12.3:


Router#show environment


--Output of Show Environment Command--


Power Supply 1 is present.

Fan status: normal

Input Voltage status: normal

DC Output Voltage status: normal


Power Supply 2 is present.

Fan status: normal

Input Voltage status: normal

DC Output Voltage status: normal


48V Power Supply 3 is not present.


48V Power Supply 4 is not present.


Board Temperature: normal.



PLS RATE if HELPS



Best Regards,


Guru Prasad R

Actions

This Discussion