Multicast mtrace question

Unanswered Question
Jul 19th, 2007
User Badges:

Is there a way to get the name of the router i.e. the router prompt with the interface address in the output of the mtrace command instead of just the interface addresses.



R1#mtrace 1.1.1.1 2.2.2.2 239.1.1.1.

Type escape sequence to abort.

Mtrace from 1.1.1.1 to 2.2.2.2 via group 239.1.1.1

From source (?) to destination (?)

Querying full reverse path... * switching to hop-by-hop:

0 1.1.1.1

-1 * 1.1.17.1 PIM [1.1.1.1/32]

-2 * 1.12.1.13 PIM [1.1.1.1/32]

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
purohit_810 Fri, 07/20/2007 - 09:44
User Badges:
  • Silver, 250 points or more

Did you try Mstat Command


mstat {source-name | source-address} [destination-name | destination-address] [group-name | group-address]



2) Once you do MTRACE after use PING and resolve it. If you would perticular hop name.

Regards,

Dharmesh Puorhit

Actions

This Discussion