purohit_810 Fri, 07/20/2007 - 08:13
User Badges:
  • Silver, 250 points or more


1) Did you installed Java Plug in window/linux.?

2) VPN Wizard Only work into Context Mode ... Not in transperant Mode.

Using the VPN Wizard

The VPN Wizard configures basic VPN access for LAN-to-LAN or remote client access. The VPN Wizard is available only for security appliances running in single context mode and routed (not transparent) firewall mode.

To use the VPN Wizard to configure VPN, perform the following steps:


Step 1 Click Wizards > VPN Wizard.

Step 2 Supply information on each wizard pane. Click Next to move through the VPN Wizard panes. You may use the default IPSec and IKE policies. Click Help for more information about each field.

Step 3 After you complete the VPN Wizard information, click Finish on the last pane to transmit the configuration to the security appliance.

Look on : http://www.cisco.com/en/US/products/ps6121/prod_release_note09186a008080ce24.html#wp55560

3) Last upgrate ASDM ver 6.0(2) to 6.3(X).


Dharmesh Purohit

AnnaStephanie Fri, 07/20/2007 - 09:16
User Badges:

1. I am using the ASDM launcher in Windows

2. I changed the mode to multiple but I still cannot see the VPN wizard

froggy3132000 Sun, 07/22/2007 - 05:49
User Badges:
  • Bronze, 100 points or more

VPN is not supported in multiple context mode.

AnnaStephanie Mon, 07/23/2007 - 04:57
User Badges:


I changed the firewall to single, routed mode and now I see the VPN Wizard. Thanks for your help!


This Discussion