07-20-2007 07:04 AM - edited 03-14-2019 10:41 PM
Hello,
I have a question in regards to registering a Nortel phone (1140E) with CCM v4.2(3). I haven't been able to find any information on doing this (in the 4.2(3) CCM Administration Guide) or in this forum...
Is this possible? And if so, is a SIP trunk or Call Manager Express required?
Thanks!
Billy Mathis
07-20-2007 07:06 AM
SIP Endpoints are not supported in CM 4.X track, you will need 5.X/6.X, or CME 3.4+.
However, I am not sure if Nortel SIP endpoint will work :-(
Chris
07-20-2007 07:17 AM
Thanks for the fast reply Chris...much appreciated!
Regards,
Billy
07-20-2007 03:19 PM
Is this Nortel phone a SIP device or a Nortel proprietary Unistim device. Many of the early Nortel where the later and they will only work with Nortel's own softswitch CS2K
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: