Can't connect to peers on VPN Part 2

Unanswered Question
Jul 20th, 2007

I have two internet connections here, one is a T1 line connected to a Cisco 2800 series, the other is a DSL line connected to a Cisco 506-E which is used for a webserver and VPN traffic.

The network is as follows:

IP Range:

IP Subnet:

2800 Series IP:


PIX VPN Pool IP Range:

PIX VPN Pool Subnet:

All the machines are configured to use the 2800 series as the main gateway.

The webserver is using the DSL line on a separate interface (it also uses another interface for network traffic because it hosts files).

What I need to do and haven't be able to is make all the machines 'see' the PIX when a remote/ping request is made from the VPN. We had already determined that adding a route that would forward all request from the VPN pool's subnet to the router can be done on the 2800 series, but since I have no access to that machine we are stuck.

I would like any assistance if possible.

-Mike Jankowski

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion