07-23-2007 03:26 AM - edited 03-10-2019 03:17 PM
hi,
i have added a controller to the ACS as a AAA client then defined the ACS in the WLC but i cant be able to authenticate users from the ACS only the local users on the WLC how can i get over this? help please.
Solved! Go to Solution.
07-23-2007 08:09 AM
The "bad request from NAS" usually indicates incorrect shared secret settings. Please
check or re-configure the shared secret on the controller and ACS for this NAS, do not copy/paste.
07-23-2007 05:45 AM
Hi,
Do you get any hits in ACS failed attempts ? Is acs for windows or acs appliance ?
Regards,
~JG
07-23-2007 07:31 AM
the ACS i have is an appliance. messages on failed attempts changed from unknown NAC (though the WLC's IP was listed) to bad requests.
07-23-2007 07:47 AM
the ACS i have is an appliance. messages on failed attempts changed from unknown NAC (though the WLC's IP was listed) to bad requests.
07-23-2007 08:09 AM
The "bad request from NAS" usually indicates incorrect shared secret settings. Please
check or re-configure the shared secret on the controller and ACS for this NAS, do not copy/paste.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide