Cisco Aironet 1200 - MIBS question

Unanswered Question
Jul 23rd, 2007
User Badges:

firmware installed 123-8.JEB


Hello,


I use NET-SNMP to take information from AP's database agent.


I want the following information:

client rates (Mbps) - the current rate of

every client connected to the access point. For example for 3 clients -> 1Mbps,5.5Mbps, 11Mbps


I have searched all the supported MIBS from Cisco's website but i cant find anything...


Do i miss something??

Can you help plz...


Best regards,

Theodoros Dionysiou



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
irisrios Fri, 07/27/2007 - 12:34
User Badges:
  • Silver, 250 points or more

There are no MIBs available > YOu can know the data rate from the client utility themselves.You can also use Protocol analyzer or link test on the client utility to know the data rates.

theodionys Fri, 07/27/2007 - 23:16
User Badges:

Hello again,


I have found what i needed.


CISCO-DOT11-ASSOCIATION-MY.my


Object : cDot11ClientCurrentTxRateSet


This object gives the information about the current rate that the access point sends data to the client.


I have tested this and it's correct.


Thanks


Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode