Hi,

I have LMS 2.5 on Windows with

CMS 3.0.4

CM 4.0.4

CV 6.1.4

DFM 2.0.5

IPM 2.6.0

RME 4.0.4

and fairly up to date

I have several cisco 7609 with 2 types of rsp 720

with snmp walk on the boxes this is what I get from the new types of boxes:

RFC1213-MIB::sysDescr.0 = STRING: "Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB1, RELEASE SOFTWARE (fc3)..Technical Support: http://www.cisco.com/techsupport..Copyright (c) 1986-2007 by Cisco Systems, Inc...Compiled Fri 01-Jun-07 0"

RFC1213-MIB::sysObjectID.0 = OID: CISCO-SMI::ciscoProducts.835

but this from the old ones:

RFC1213-MIB::sysDescr.0 = STRING: "Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SRA2, RELEASE SOFTWARE (fc4)..Technical Support: http://www.cisco.com/techsupport..Copyright (c) 1986-2006 by Cisco Systems, Inc...Compiled Thu 30-Nov-06 13:45 by pr"

RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::cisco7609

the new ones come as unknown device type and in ciscoproducts mib type 835 is not in the list.

what can I do?

regards,

Siggi