07-24-2007 09:37 AM - edited 03-13-2019 04:18 PM
We have just placed a telephone outside our security shanty for people to call security if no one is present. We want the phone to dial one extension when the handset is offhook. No other calling capabilities can exist. How would I go about configuring this? I believe it to be a necessity to create a new CSS for security, and assign that CSS to the external telephone, but I am not certain. Any advice and pointers would be most appreciated.
Solved! Go to Solution.
07-24-2007 09:50 AM
Hi William,
Here is a good config guide that shows the step by step to setting Hotdial up;
Hotdial on IP Phones with CallManager Configuration Example
Hope this helps!
Rob
07-24-2007 09:50 AM
Hi William,
Here is a good config guide that shows the step by step to setting Hotdial up;
Hotdial on IP Phones with CallManager Configuration Example
Hope this helps!
Rob
07-24-2007 09:59 AM
Many, many thanks Rob. That should do the trick for me.
07-24-2007 11:30 AM
Hi William,
You are most welcome :)
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: