AP: 1131 12.3(7)JA3
Four VLANS, three mapped to SSIDs all on B/G radio only, A radio shutdown.
170 native, no SSID
110 guest internet only SSID w/DHCP from BBSM. Open Auth
180 secure intranet SSID w/DHCP. WPA2
810 another secure separate intranet SSID, no DHCP. Client IPs managed manually. WPA2
This is the first time I've tried setting up an SSID to a VLAN with no DHCP.
When users connect to the 810 SSID, "show dot11 assoc all" shows them connected to vlan 180, not 810.
This happens both when they use static IP assignments and DHCP.
When I remove vlan/SSID 180 from the B/G radio and move it to the A radio, 810 users show up on vlan 810 as they should.
FWIW, VLAN 810 gets mapped to bridge group 255, unlike all the oter SSIDs which get mapped to bridge groups of the same number, eg. vlan 180 - bridge-group 180.
Anybody seen this or have any idea why this happens?