07-24-2007 12:28 PM - edited 03-14-2019 10:45 PM
Is there a way to implement Forced autorization codes in Callmanager express 4.x?
This is really urgent.
Thanks.
07-24-2007 12:39 PM
Yes you can
Have a look at this link
[Edit] i didn't read the question correctly and the link applies to CCM as opposed to CCME
HTH
Narayan
07-24-2007 12:40 PM
With CME there are at least three methods to block calls, two are described in the admin guide and are:
1. login/logout with after-hours blocking.
2. cor list.
The third is that you invent a prefix so that only calls made with it will go through.
Hope this helps, please rate post if it does!
07-24-2007 12:49 PM
You can use a TCL script for doing that, not natively supported. But you need to contact your local Cisco SE to obtain it. Afaik, this feature has been already incorporated and will be supported in the future CME version 4.3...not available yet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide