07-24-2007 01:18 PM - edited 03-03-2019 06:00 PM
>ping 10.104.36.32
>sh ip arp 10.104.36.32
>sh mac add add
432 0011.2578.11b3 DYNAMIC Gi0/19
When I do a show cdp neigbors it's show me an ip phone and the ipphone ip address. Is there any way to find the pc ip address connected to this ip phone.
Any switch commands?
Cheers
Solved! Go to Solution.
07-24-2007 02:00 PM
try "show mac-address dynamic | inc gi0/9". You will see all the MAC on that port and one of them is the PC. Then show arp |inc
Hope this helps, please rate post if it does!
07-24-2007 02:00 PM
try "show mac-address dynamic | inc gi0/9". You will see all the MAC on that port and one of them is the PC. Then show arp |inc
Hope this helps, please rate post if it does!
07-24-2007 02:26 PM
Cool!!! Many thanks!
Actually using show mac-address dynamic | inc gi0/9 didn't show the mac addresses but then I tried sh mac address dynamic interface gigabitEthernet 0/9 and it worked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide