cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
339
Views
0
Helpful
1
Replies

ACS1113 & two factor authentication

mulhollandm
Level 1
Level 1

folks

another query!

i need to authenticate users by crytocard on the acs appliance but when i select the method of authentication i only have acs internal database an an other - no crypto

do i need another licence or is there an option somewhere to make this available

thanks to anyone taking the time to reply

1 Accepted Solution

Accepted Solutions

rochopra
Cisco Employee
Cisco Employee

Hi

You need to configure cryptocard as Radius Token server in external user database.

Following link can give you information on how to configure token server in ACS:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/user/usrdb.htm#wp356090

Would like you to see following link though which refers that crypto card is not tested with latest version of ACS:

http://www.cisco.com/en/US/partner/products/sw/secursw/ps2086/products_device_support_table09186a00807144e4.html#wp27457

Hope this helps.

Regards

Rohit

View solution in original post

1 Reply 1

rochopra
Cisco Employee
Cisco Employee

Hi

You need to configure cryptocard as Radius Token server in external user database.

Following link can give you information on how to configure token server in ACS:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/user/usrdb.htm#wp356090

Would like you to see following link though which refers that crypto card is not tested with latest version of ACS:

http://www.cisco.com/en/US/partner/products/sw/secursw/ps2086/products_device_support_table09186a00807144e4.html#wp27457

Hope this helps.

Regards

Rohit

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: