07-24-2007 05:17 PM - edited 03-14-2019 10:45 PM
We have two 2851 CME4.1 both with CUE3.0 connected via 1700 routers and a T1 line. there is a user that moves between the two sites that we want to have a single DN and voicemail box.
The following scenario works:
One phone at each site configured with the same primary DN each attached to its own CME.
Calls from the first site to the primary dn get CFNA to a secondary extension at the second site, which CFNA/CFB to the CUE at the second site.
Scenario that doesn't work:
Calls from the first site to the primary dn get CFNA to a secondary extension at the second site, which CFNA/CFB to the CUE at the first site.
Will this configuration work at all, and if so, how do the CME/CUE/GW need to be configured?
07-24-2007 08:33 PM
There is a lot of hairpinning happening (h323 to sip, h323 to h323 etc) which i would recommend adding,
voice service voip
allow connections h323 to h323
allow connections h323 to sip
allow connections sip to h323
allow connections sip to sip
07-25-2007 07:38 AM
Good, that was in the config on the CME's and primary gateway router already, in addition to these lines:
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
Also, calls from the PSTN get a 'no mailbox associated' message in both scenarios.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide