cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
388
Views
5
Helpful
5
Replies

CCM to CME Voicemail issue

gary.simpson
Level 1
Level 1

Hi all,

I have set up CCM 4.1(3) to talk to CME via a ICT (GK) trunk. Everything works ok except calls from a CCM phone over the ICT trunk do not get successfully forwarded to CUE (the call just drops). I can dial the VM pilot number direct from the CCM phones, it just appears to be when the CME phones forward on no answer or busy.

When i call from a PSTN phone the CME phone transfers to CUE fine.

I have checked codecs and everything is G711u for now to avoid any transcoding issues.

Any help would be greatly appreciated.

Many thanks,

Gary.

5 Replies 5

gogasca
Level 10
Level 10

...Are you using the evil dial-plan pattern command in CME?

I have tried it with and without the dialplan-pattern command.

Could you please attach detailed CCM trace and debug voice ccapin inout?

Include calling, called and timestamp.

Thanks

Thanks for your help gogasca, i have just fixed it.

It was that the command "call-forward pattern .T" was missing. I had the "transfer-pattern .T" in, and i thought that was all that i needed.

Many thanks again,

Gary.

Almost a year later and your solution helped me. +5 for you. Thanks for the assistance.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: