Cisco 7507 GEIP Strange Issue

Unanswered Question
Jul 25th, 2007

I have strange issue with 7507. I have added a new GEIP controller into it.

By adding this GEIP controller the CPU usage has been increased up to 20%.

The strange thing is that CPU usage is always normal + 20% and there is no traffic on this interface ( even if interface is shutdown the usage remains same ). And if there is traffic it's same J

I can't see the process taking this high CPU utilization if I look into CPU usage stats.

What the heck has happened to this? J

Here are CPU stats:

Router# #show proc cpu | excl 0.00%__0.00%__0.00%

CPU utilization for five seconds: 15%/13%; one minute: 15%; five minutes:

13%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

5 518320 41974 12348 0.00% 0.11% 0.11% 0 Check heaps

20 66004 924869 71 0.08% 0.01% 0.00% 0 IPC Seat

Manager

22 204088 1466063 139 0.00% 0.03% 0.02% 0 ARP Input

31 7080 1609 4400 0.98% 1.44% 0.59% 2 Virtual Exec

52 117672 5843 20138 0.00% 0.02% 0.00% 0 Per-minute

Jobs

73 3586004 17990635 199 0.82% 0.60% 0.49% 0 IP Input

189 38964 213398 182 0.00% 0.01% 0.00% 0 IP SNMP

191 56184 104952 535 0.00% 0.01% 0.00% 0 SNMP ENGINE

196 160560 1397067 114 0.08% 0.01% 0.00% 0 BGP Router

197 49200 250208 196 0.00% 0.01% 0.00% 0 BGP I/O

IOS version:

IOS Version 12.4(3a)

Controller

Router# sh ver | inc GEIP

1 GEIP controller (1 GigabitEthernet).

1 GEIP controller (1 GigabitEthernet)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jahilnt10 Wed, 07/25/2007 - 13:10

GEIP Controller Memory Size: 128 MBytes DRAM, 4096 KBytes SRAM

And

Cisco RSP8 (R7000) processor with 256MBytes memory.

Actions

This Discussion