07-25-2007 12:05 PM - edited 03-03-2019 06:01 PM
I have strange issue with 7507. I have added a new GEIP controller into it.
By adding this GEIP controller the CPU usage has been increased up to 20%.
The strange thing is that CPU usage is always normal + 20% and there is no traffic on this interface ( even if interface is shutdown the usage remains same ). And if there is traffic it's same J
I can't see the process taking this high CPU utilization if I look into CPU usage stats.
What the heck has happened to this? J
Here are CPU stats:
Router# #show proc cpu | excl 0.00%__0.00%__0.00%
CPU utilization for five seconds: 15%/13%; one minute: 15%; five minutes:
13%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
5 518320 41974 12348 0.00% 0.11% 0.11% 0 Check heaps
20 66004 924869 71 0.08% 0.01% 0.00% 0 IPC Seat
Manager
22 204088 1466063 139 0.00% 0.03% 0.02% 0 ARP Input
31 7080 1609 4400 0.98% 1.44% 0.59% 2 Virtual Exec
52 117672 5843 20138 0.00% 0.02% 0.00% 0 Per-minute
Jobs
73 3586004 17990635 199 0.82% 0.60% 0.49% 0 IP Input
189 38964 213398 182 0.00% 0.01% 0.00% 0 IP SNMP
191 56184 104952 535 0.00% 0.01% 0.00% 0 SNMP ENGINE
196 160560 1397067 114 0.08% 0.01% 0.00% 0 BGP Router
197 49200 250208 196 0.00% 0.01% 0.00% 0 BGP I/O
IOS version:
IOS Version 12.4(3a)
Controller
Router# sh ver | inc GEIP
1 GEIP controller (1 GigabitEthernet).
1 GEIP controller (1 GigabitEthernet)
07-25-2007 12:58 PM
What is memory You have?
07-25-2007 01:10 PM
GEIP Controller Memory Size: 128 MBytes DRAM, 4096 KBytes SRAM
And
Cisco RSP8 (R7000) processor with 256MBytes memory.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: