07-26-2007 08:06 AM - edited 03-14-2019 10:47 PM
Hi all,
I cant for the life of me get my fax solution to work I brought a VIC2-2FSX and want to have two fax machines off of it. Does anyone have a config already configured I can look at. I seem to get one thing sorted then another thing breaks. Exsample inbound calls go to the right port but only one will ring. or I plug a phone into port 0 and I pick up the phone and port 1 goes off hook
Thanks
Paul
07-26-2007 11:41 PM
HI,
IS you gateway is MGCP or H323 configured ?
I have some conf example for you.
Luc
07-26-2007 11:56 PM
Hi Luc,
The next hop is a sip hop, but the gateway is h323. It seems to be more a phisical voice port conf issue as the calls are doing strange things.
Thanks
Paul
07-27-2007 12:20 AM
Hi,
please check that your phone/fax cable use two and only two central wires in the rj-11 connector. Port 1 is also cabled in port 0 as ping 2-5 and some phones can cuase that using multiwire cable.
Hope this helps, please ratepost if it does!
07-27-2007 01:31 AM
Yep thats seems to be the issue , butchered the cable and it works fine. It wont ring my phone but the fax works fine.
Many thanks
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide